Select the Generic Snapmaker (Marlin) / snapmaker as the post processor, change the filepath or file name as you need, and click Post and save the file to your output folder.

Select all the text.ģ.3.3 On the side panel, go to Passes, tick Multiple Depths, and click OK.ģ.3.4 Go to Actions, click Simulate > Start the Simulation.ģ.4 Go to Actions > Post Process.

Select the 3.175 V-Bit.ģ.3.2 On the side panel, go to Geometry > Contour Selection. On the side panel, click Select > Local > Snapmaker Original CNC Tool Library. Click OK.ģ.2.3 On the side panel, go to Passes, tick Multiple Depths, and click OK.ģ.3.1 Go to 2D > Engrave. Tick the Tabs, and put the Tab Width, Tab Height, and Tab Distance at 3 mm, 1 mm, and 50 mm respectively. From Snapmaker 2.0 CNC Tool Library, select the 1.5mm Flat end mill.ģ.2.2 On the side panel, go to Geometry > Contour Selection, and select the contour face. On the side panel, go to Tool > Select > Local > Import. If not, tick Flip Z Axis on the side panel.ģ.1.3 On the side panel, go to Stock, put the Stock Side Offset and Stock Top Offset at 0 mm, and click OK.ģ.2.1 Go to 2D, and click 2D Contour. Go to MILLING > SETUP, and click New Setup.ģ.1.2 Pivot the model to see if the Z Axis is facing up. Go to Solid > Extrude, select the text, put the Distance at -1 mm, and click OK.ģ.1.1 Switch to the Manufacture Workspace. Put the diameter at 50 mm.Ģ.5.3 Select the inner circle, and click CREATE > Text.Ģ.5.4 Type in the text you want to cut, place text below the path, and click OK.Ģ.5.5 Add depth to the text. Put the depth at 10 mm, and click OK.Ģ.5.1 Click Select, and click the top surface.Ģ.5.2 Go to Solid, and click Create Sketch to create another circle inside the previous one. Place the center point at the (0,0) coordinates. Put the diameter at 80 mm. Go to Create > Circle > Center Diameter Circle. In the DESIGN Workspace, click Create Sketch. Designing A SketchĢ.1 Launch Autodesk Fusion 360. As such, the filepath specified here might be slightly different from that on a mac OS. Note: This guide uses Windows OS as an example. cps format) to Users > Username > AppData > Roaming > Autodesk > Fusion 360 CAM > Post. tools format) to Users > Username > AppData > Roaming > Autodesk > CAM 360 > libraries > Local. Happy making!ġ.1 Visit, and download the Configuration Files & Tool Libraries.ġ.2 Unzip the downloaded file snapmaker-fusion360-configuration-20200519. Alternatively, you can practice modeling with this guide on Fusion 360, and design a project of your own.

If you intend to follow this through, then you will need a cylindrical piece of material that can be CNC cut, with a minimum diameter of 85 millimeters (mm). This guide teaches you how to generate a simple CNC model with Autodesk Fusion 360, and proceed to CNC cutting with your Snapmaker.

Autodesk fusion 360 mac os